Bring the warmth of wood-grain finishes into modern retail merchandising with HEDA's Steel Wooden Gondola Shelves. No.00211 combines light oak-style backing and display surfaces with dark-gray steel framing and silver-colored shelf-front profiles. The collection includes wall shelving and freestanding double-sided gondola arrangements, allowing retailers to coordinate different selling areas with a consistent fixture design.
Natural wood-style surfaces combined with dark-gray metal components.
Perimeter wall shelving and freestanding central display gondolas.
Different wood-grain finishes, colors, shelf levels and dimensions.
The original No.00211 product gallery includes dimensional drawings for a double-sided central gondola and a single-sided display unit. Both feature a wood-style merchandising surface and steel structural components, while their frame geometry and display orientation differ.
A freestanding gondola arrangement with a shared central backing structure and shelves extending toward opposite retail aisles. The original illustration shows light wood-style shelf surfaces, silver-colored front profiles and dark-gray brackets and lower base components. This configuration can be considered for central store display areas.
A single-facing metal-and-wood display fixture featuring a tall wood-grain back panel, multiple flat shelves and an open rectangular metal end-frame structure. The darker steel frame outlines the side panels while the wood-style surfaces remain visually consistent across the shelving levels. It can be considered for wall-side merchandising layouts.
The original No.00211 gallery includes a separate shelf component drawing, allowing buyers to examine the shelf surface, front-edge profile and support connection more closely.
The original component image shows a rectangular wood-style shelf surface, a silver-colored front profile and a dark-gray metal support underneath. A visible mounting feature at the rear end indicates a bracket-supported installation. The exact panel material, bracket thickness, edge profile and loading must be confirmed for the chosen configuration.
Shelf size shown is a component reference. Different shelf dimensions and configurations may be specified through customization. No numerical shelf loading is stated in the original product specification.
The steel-and-wood visual language comes from a combination of separate structural and decorative components. The design should be reproduced according to the actual model, not replaced with unrelated pegboard or wire-grid structures.
Tall panels with a light vertical wood-grain appearance form the main visual background of the display. The panels are divided by the dark metal supporting structure. Their exact substrate, thickness, finish and connection details should be confirmed before production.
The original photographs show vertical dark-gray metal supports with regularly spaced mounting slots. These allow compatible shelf brackets to connect to the frame. HEDA identifies cold-rolled steel as a principal material for the product.
Light silver-gray profiles define the front edges of the wood-style shelves. They provide a consistent horizontal detail across the wall shelving and lower gondola configurations. The exact profile material and fastening method require confirmation.
The shelf component diagram shows a dark-gray support bracket extending beneath the shelf surface. The bracket's formed connection detail must match the specified steel upright and shelf construction.
The pictured fixtures feature dark-gray lower base sections beneath the display shelves. These create a coordinated appearance with the supporting metal structure. Base dimensions, floor leveling and stability should be determined from the final configuration.
The No.00211 collection gives retailers the option to discuss taller wall-oriented shelving alongside lower freestanding gondola displays. The matching wood-grain finish and metal construction can provide a cohesive appearance across different fixture locations.
Concept illustration only, not a dimensional layout or installation drawing. Final aisle width, rack orientation, access clearance and structural stability must be reviewed for the actual store.
HEDA confirms that the No.00211 collection supports customized layer quantities, colors and wood-grain choices. The manufacturer also supports custom dimensions, materials and store design solutions.
The original product uses a light-oak-style finish on the visible backing and shelf surfaces. Buyers can discuss alternative wood-grain patterns and colors to match the store design. The exact panel substrate, thickness, surface treatment and edge construction should be selected for the final specification.
Dark-gray cold-rolled steel members provide the main visible structural framework in the original design. Brackets, upright mounting slots, base components and connections must remain compatible within the selected configuration. Alternative approved steel finishes can be reviewed according to project requirements.
HEDA supports customization of shelf quantities, dimensions and display arrangements. Buyers can discuss the number of wall sections, central gondola bays, shelf levels and front-edge components needed for the store. Final loading and overall dimensions must be confirmed through the approved technical design.
No.00211 is intended for supermarkets, grocery stores, convenience stores and other retail environments. Final shelf depth and loading should always be matched to the actual merchandise.
Use suitable wall shelving for perimeter merchandise displays and double-sided gondolas for central aisles. The wood-grain appearance can provide a warmer retail presentation than plain white metal fixtures. Shelf levels and loading should be configured according to the products being sold.
The modular shelving concept can be reviewed for smaller shops with a mixture of wall and freestanding display areas. Product package sizes, overall fixture depths, aisle clearances and shelf heights should be considered before selecting the configuration.
The steel-and-wood appearance can be considered for suitable packaged goods, household products, stationery and selected lifestyle merchandise. Buyers can coordinate the wood-grain finish with the wider store interior and specify shelf sizes for their product assortment.
HEDA publishes dimensional drawings for two No.00211 fixture configurations and one shelf component. Other technical specifications should be confirmed according to the intended order.
HEDA supports customized supermarket shelving projects with store design and installation guidance. To prepare an accurate quotation, provide the required fixture layout, wood-grain finish, merchandise information and expected quantity.
HEDA can discuss customized fixture dimensions, colors, materials, number of shelf levels and store layout requirements. Floor plans and 3D drawings can support planning for suitable wall shelving and double-sided gondola arrangements.
Share the available selling area, wall lengths, aisle positions and intended display fixture locations.
Identify the required wall shelving runs, single-sided units, double-sided gondolas and number of connected sections.
Confirm the preferred rack sizes, shelf depths, number of display levels and vertical spacing.
Provide the product categories, package dimensions, typical merchandise weights and expected loading for each shelf.
Specify the wood-style appearance, panel material, desired metal finish, front-edge profile and any color references.
Confirm the shipping destination, packing requirements, required installation documentation, site conditions and expected project schedule.
Review the original illustrated dimensions, material choices and available customization options before confirming the final shelving specification.
HEDA identifies cold-rolled steel as a principal structural material. The original product design combines dark-gray metal frames with wood-grain backing and shelf surfaces. The exact wood-panel substrate, steel thicknesses and surface finishes should be confirmed in the project specification.
The illustrated double-sided gondola measures 1350 mm in height, 630 mm across the front and 700 mm in overall depth. The single-sided unit shows 1350 mm height, 680 mm width and 350 mm depth. A separate shelf drawing shows 630 × 280 mm. All are example dimensions for customization reference.
Yes. HEDA lists custom wood-grain options, colors and number of shelf levels for this product. Sizes and selected material specifications can also be discussed according to the project requirements. Final options should be confirmed in approved drawings and the quotation.
Yes. The official No.00211 gallery includes a coordinated group of taller wall shelving and lower freestanding gondolas. Buyers can request a store layout combining compatible fixture formats. Overall dimensions, aisle clearance, connection details and expected loads should be reviewed.
HEDA states that it provides whole-store shelving solutions and installation guidance. Floor-plan and 3D drawing support can be discussed for customized store projects. Share the store layout, selected fixture types and order requirements to discuss the appropriate service scope.
The official No.00211 listing does not provide a complete numerical load-rating table for each pictured configuration. Buyers should provide the intended merchandise weight and shelf dimensions to HEDA. The permissible loading must be confirmed for the final materials, brackets, uprights and assembled fixture design.
Send HEDA SHELVES your store floor plan, required wall shelving and gondola configurations, preferred dimensions, number of shelf levels, product weights, wood-grain and metal finish requirements, and estimated order quantity. Our team can review your No.00211 product requirements and prepare a customized shelving quotation based on your retail project.
Find answers to common questions about our manufacturing, product customization, ordering, delivery and warehouse shelving solutions.
We are a manufacturer. HEDA SHELVES has specialized in manufacturing warehouse racking systems, supermarket shelving and various display stands since 2001.
Our factory is located in Foshan, Guangdong, China. We warmly welcome customers to visit our factory. Please contact us to arrange your visit.
Yes, samples are available upon request. A sample charge applies, and the sample cost will be refunded when you place your next order.
Yes. HEDA SHELVES has extensive experience in customized shelving and display solutions. We can manufacture products according to customer designs and project requirements.
Of course. We welcome custom sizes and colors to meet different storage, retail display and project requirements.
Yes. Our products are mainly manufactured from metal. We also produce shelving accessories and display solutions using materials such as:
Our general production lead time is within 15 days. The actual lead time depends on the order quantity, product design and customization requirements.
Our standard payment terms are:
We can arrange shipment using the following methods:
Please provide your destination seaport. We will check and update the sea freight cost based on your shipping destination.
If you have your own shipping agent or freight forwarder, please provide their contact details. We will coordinate the delivery arrangements with your nominated agent.
Our minimum order quantity is generally 10 sets. Larger order quantities may qualify for more competitive pricing.
Since different customers and projects require different product sizes and specifications, providing the following information will help us prepare your quotation more efficiently.
Not sure about the specifications? Simply tell us about your storage or display requirements. Our experienced sales team will help you develop a suitable shelving solution.
We provide step-by-step installation drawings for each type of shelving and racking system.
Our experienced team supports customers throughout the design, production and after-sales stages.
Our shelving products are generally flat-packed and protected with bubble wrap or protective film, using standard export cartons.
Other packaging options, such as wooden boxes, are also available according to customer requirements.
The main difference is the number of upright frames required.
Example: For a continuous row of 15 wall shelving bays, the configuration would be 1 starter rack + 14 add-on racks.
